Myrtle Beach Electricians On What NOT To Do For A Safer Home

According to Myrtle Beach electricians, electrical issues and problems are often due to unawareness of the members of the household on how to properly maintain and use their electrical system. This is why it is important not only for the homeowner and head of household but all the members of the household as well to learn about properly using their electricity and what danger signs to look out for to prevent more severe problems from developing. One of the most important responsibilities of a homeowner and a head of household is to keep the entire house safe for everyone living in it. But they can only do this by working with all the members of the household. The entire household should practice discipline and cooperation to ensure everyone’s safety.

Below are some of the things you should not do to keep your family safe and prevent severe and dangerous electrical problems.

1. Leaving plastic-sheathed cable wires exposed to ceiling or wall framing This type of cable can be easily damaged when left exposed to ceiling or wall framing. Damages to a plastic-sheathed cable could eventually lead to more severe problems according to many electrician professionals. What you should do instead of leaving them exposed to framing is to cover the length of the exposed cable with a board that is 2 x 2 in size and at least 1 1/2 inches in thickness. Nail or screw the board to keep it in place. Do not staple the cable to the board because this will only leave more sections of the cable exposed.

2. Improperly connecting ground fault interrupters (GFCI) Generally, Ground Fault Circuit Interrupter or GFCIs have two sets of terminals, namely line, and load. These should be appropriately connected to your electrical system for the GFCIs to function. And you need them to function properly because they are what stand between your safety and an electrical shock or, worse, electrical fire.

You will often find your GFCIs in your bathrooms, kitchens, garages, and patios. They are often set up near sinks and other sources of water. The reason for this is because these are the areas where electrical shocks are most likely to happen. You need to ensure your GFCIs are properly connected to your electrical system so that it will function – by automatically shutting off power – should there be a change in current.

Because it can be tricky to determine whether or not your GFCIs are properly connected, it is highly recommended that you call in a professional at once. Aside from determining whether or not your GFCIs are properly connected, they also have the necessary tools and skills to safely reconnect them to the proper terminals.

3. Connecting wires outside of an electrical box Myrtle Beach electricians strongly warn against connecting wires outside of an electrical box. If there is one thing that is important in all residential and commercial electrical system, that is the electrical box. The primary purpose of electrical boxes is to protect the surrounding area from being damaged by sparks and heat coming from short-circuited or loose wires.

Imagine your electrical wires short-circuiting or becoming loose, sparks would fly from it and would land on other nearby materials and surfaces. This is how electrical fires begin. And the only way to prevent this is to keep your electrical wires inside a box. Aside from this, keeping them inside an electrical box helps keep your home look more organized by hiding the unattractive wires traveling along your walls and ceilings. Also, an electrical box helps protect the wires from other aspects – such as too much heat and/or radiation coming from your other appliances – which could easily damage the wires.

4. Placing too many wires inside your electrical box Your electrical box should not be overflowing with wires and clamps. Too many wires inside a box could easily result in short-circuiting, which will eventually lead to an electrical fire. If your electrical box is already full, consider investing on a larger electrical box or buying another electrical box to put your wires in. Keep in mind that there are a limited number of wires and clamps to be placed inside an electrical box.

If you are not sure about how big of an electrical box you need for your home, consult a professional electrician. You can also take a picture of your wires and clamps and bring them to your local hardware or electrical shop so that they may help you find the most appropriate and suitable box for your wires.

5. Not securing your cables with clamps Aside from placing all your wires inside electrical boxes – and making sure the electrical box is not overflowing, you should also ensure that your wires are tightly secured with clamps. Note that cable clamps prevent your wires from being strained and overworked out, which could lead to bigger problems such as short-circuiting.

When buying cable clamps, take note of the type of wires and electrical box that you are using. There are different clamps made for metal and plastic electrical boxes.

6. Placing your electrical box behind or near combustible materials Combustible materials are materials that could easily catch fire. And these include your wood paneling. Thus, it should be a safety precaution to not place your electrical boxes near or behind your wood paneling. You can never tell when wires could short circuit and give out sparks or overheat. When these reach your wood paneling, an electrical fire could easily start.

If you have already placed your electrical box behind or near your wood paneling, you do not have to remove it and set it up in another location. You can leave it there, provided you add a plastic or metal box extension. This would effectively protect your wood paneling from catching any spark or heat that may come from your electrical box. If unsure, contact your electrical contractor.

Looking for a professional electrician to work with? Contact Myrtle Beach Electrician Pros and inquire about their services now.

Myrtle Beach Electrician Pros Myrtle Beach, SC  29577 843-353-6345 electriciansmyrtlebeach.com

http://electriciansmyrtlebeach.com/what-not-to-do-for-a-safer-home/

Pro Electricians Share Importance Of Keeping Residential Electrical System In Top Shape

Homeowners know for a fact that regular inspection as well as maintenance of a home’s many different “parts” can offer several benefits. Certain things like the hot water tank, furnace, as well as the roof are among the parts of a home that is almost always maintained. Meanwhile, among those that are often overlooked include the electrical system, according to a electrician in Myrtle Beach. By doing regular maintenance and addressing minor issues as they arise, headaches due to major problems could be avoided. Preventative methods could assist in protecting the value of your home over time, so that when the time comes when you would like to sell your home, you can easily avoid frustrating roadblocks. Residential electrician Myrtle Beach know the different aspects of an electrical system that usually become problematic for regular homeowners. If you haven’t had your home’s electrical system inspected for any possible problems, maybe it is time to have it checked by a professional.

Residential Inspection Is A Must

Among the many things that homeowners must watch out for is unsafe electrical panels. Older houses usually have aluminium wiring and although this alone doesn’t pose a risk, poor or loose connections could result in overheating and arcing, which could cause electrical fires and even the destruction of your home. Aluminum wiring is fine but residential electrician recommend that you have the electrical panel inspected, a service that several firms offer for free. Another issue with electrical systems that electricians usually encounter is arc faults. These are unintentional discharges that could result in electrical fires are due to things such as incorrectly installed wall receptacles, as well as damaged electrical wires or extension cords. Although you cannot prevent arc faults from happening, electricians could use a device that could prevent them before they do any damage to your house. This device won’t just stop damage, however, it would also determine the source of the issue so that it could be fixed. Power surges are a concern as well as they could pose a risks to your appliances and electronics. Power surges happen when too much voltage is sent through the wall outlet. This could take place for different reasons such as lighting as well as the use of high power electronic devices. In order to stop power surges and add more years to the life of your electrical devices, electricians suggest that you install surge protectors in your house. They will prevent the excess voltage from damaging your devices by rerouting it to a ground wire, which negates the energy.

If you believe that your electrical system may not be safe, or would simply like to have your electrical system inspected so you can have a peace of mind, call MB Electrician Pros now.

MB Electrician Pros Myrtle Beach, SC 29577 843-353-6345 electriciansmyrtlebeach.com

http://electriciansmyrtlebeach.com/keep-electrical-system-top-shape/

Top Reasons Why You Should Opt For Quality Surge Protection

To ensure protection of your electric appliances, professional electricians recommend the use of high quality surge protection. Electric appliances are as much a valuable investment as houses and cars. This is why it is necessary to ensure they won’t be easily affected by sudden power surges or lightning strikes. Keep in mind that an unexpected spike in electricity could easily fry every plugged in appliance that has computerized components.

The best way to prevent this is to get the highest quality of surge protection. Here are other reasons why.

Protection of your appliances is guaranteed If you invest on a whole house surge protector, you can be sure that your entire house is protected from power surges including all your electric appliances throughout the house. This device that is about the size of a toaster is usually attached to your main electrical panel. Most manufacturers of surge protectors offer warranties with their products. These may involve the cost of replacement of any appliances that are still damaged by the power surge even after installing the surge protector. Power strip surge protection is not enough Surge protectors in power strips may only be able to protect one or two of your appliances. You will have to buy more if you want to protect more of your electrical appliances. In which case, it would seem more cost-effective to invest on a high quality whole house surge protector. Often times, power strips are only able to protect your computers and does little to benefit your TV’s, washers, and other electrical appliances. If you want, you can still use your power strips for your computers as a supplementary protection aside from installing a whole house surge protector. If you are not sure, you can always seek out the help of a Myrtle Beach electrician. Whole house surge protectors have a wide range of protection offered and warranties Because issues and problems caused by direct and indirect lightning strikes have become more and more common, lots of manufacturers have designed and made available various types of whole house surge protectors. They vary in service provided, capacity, and warranty. You must choose which surge protector to use depending on the size of your house and the number of appliances you have.

For more information on whole house surge protection, contact Myrtle Beach Electrician Pros now.

Myrtle Beach Electrician Pros Myrtle Beach, SC 29577 843-353-6345 http://myrtlebeachelectricians.com

http://electriciansmyrtlebeach.com/reasons-opt-for-surge-protection/

How To Save Money On Electricians

Electricians can be expensive for good reason. Unlike the person you hire off the street to get rid of the paint from your house, an electrician is a trained expert. The requirements may vary from one state to another but in most cases, an electrician needs to 4,000 experience hours before they could offer their services to residential owners. There’s no way out when it comes to paying a significant amount for a qualified electrician. However, there are things you can do to cut costs. Create or update your electric circuit directory. The electrician arrives and checks your service panel or circuit breakers only to find a non-existent list of circuits or one that is outdated that’s totally meaningless. He’ll spend an hour trying to figure out what circuits to feed your basement. This is one of the best and guaranteed ways to cut costs on your electrician bill. You don’t have to hire an electrician if you can dot job on your own? Create a document or worksheet with two columns. One for the circuit number and another one for the places that are serviced by the circuit. Clean work area and prepare it for electrical work. You bring the electrician from MB Electrician Pros into the work area. Junk is scattered all over the floor while drywall boards can be found leaning against an open wall. The electrical contractor spends time clearing away his work area, and you’ve just made him a costly house cleaner. Before the electrician comes, make sure that his work area is clean so that he can start as soon as he arrives in your house. Know what you want ahead of time. When the electrician arrives in your home, you offer him something to drink. You sit down and discuss things about the job like the switches, wiring paths, electrical outlets, and lights. After an hour of talking, he begins work. Always remember that electricians are not your partner and is not someone you need to talk to about your home theatre or small bathroom remodel. Although they have invaluable knowledge in their field of expertise, the more decisions you can make means the less time you need to spend for needless discussion. Supply your tools You may have managed to limit the time a residential electrician spends in your home thanks to the other tips listed here. However, when you check out your bill, you’re shocked to see the bill for the materials used. If you want to install something like a baseboard heater, you can check out Home Depot and try to find the cheapest one available. Avoid affiliates. Get in touch with an electrician directly. When you search online for electricians Myrtle Beach, you will be provided with countless results of websites that offer electrical services. You may find a matching electrician but you’ll realize that he’s 75 miles away from your area or he only works on commercial jobs. The internet is filled with websites that are affiliates of contractor-matching services. Once you find a service, they’ll get a cut of at least $35. To avoid spending more, it’s best to get in touch with the electrician right away. You can also find reliable electricians through reputable websites like HomeAdvisors or Yelp.  

Call MB Electrician Pros if you need the services of a residential electrician in Myrtle Beach.

  MB Electrician Pros Myrtle Beach, SC 29577 843-353-6345 electriciansmyrtlebeach.com

http://electriciansmyrtlebeach.com/how-to-save-money-on-electricians/